|
1. Pre-cleaning
inspection / Damage report -
First I perform a pre-cleaning inspection to note any
existing problems and or damage in order to inform you of
your options
2. Dry Vacuuming -
I use commercial vacuum cleaners with a beater bar.
3. Pre-spotting (As Needed)
-
I
use specialized spotting formulas and remove any hard to
remove spots as needed.
4. Stain removal (As needed)
-
The Removal of stains or Dye molecules in Carpeting
requires application of chemicals prior to and sometimes
after cleaning process, each stain is different.
5. Enzyme Pre Treatment -
I use citrus based detergents to loosen and break up soil
deep in the carpet.
6. Agitate Solution (Rake
Carpet) -
Raking the carpet further brakes up soil and helps the
pre-spray penetrate into the carpet. Making for a deeply
cleaned carpet.
|
7. Dwell time – 15 minutes -
Allowing the conditioner to dwell for up to fifteen
minutes before hot water extraction.
8. Extract & Rinse -
Using a neutralizing formula.
9. Rake to separate fibers -
This raises the pile to evenly dry the carpet.
10. Groom carpet -
Grooming the Carpet at the end removes any loose fiber and
fluffs the pile.
11. Apply Stain Protection (Optional) -
DuPont Teflon Stain Guard
12. Rake & Groom in Stain Guard -
Carpet should take 3-4 hours for it to dry. Other factors
such as heat, airflow or humidity can effect drying times.
|
